Perth’s Leading Epoxy Concrete Sealer Experts
Floors need to look beautiful yet be durable enough to hold out against foot traffic, other sources of impact, and possible spills. And while benchtops won’t be subjected to foot traffic, the countertops will also need the same attention to protect it from water, oil stains, and industrial chemicals.
This is where the sealing comes into play. Epoxy concrete sealers are perfect for the countertops and floors that attract a lot of use. It creates a protective film that offers a durable finish against stains, water, and other types of damage. In Perth, they’re available in a clear or colour finish and often lend a glossy look. Not only can it offer protection, but it will also help to bring the surface to life.
The team at Hawk CFC is a first-rate installer of flooring systems and coatings. We’re passionate about creating better commercial and residential spaces for our customers. Since 2014, our team has helped various industries to design high-functioning solutions that impress their customers and delight everyone who uses them. Whether you need a sealer or complete flooring or benchtop installation, our team can help you to identify the most suitable option for your unique setup.
We have over 15 years’ experience in installing residential, commercial, and industrial solutions. It’s our professional workmanship and first-class range of products that make us one of the leading providers in Western Australia.
Call us on 0490 777 761 today for more information about our sealing solutions.
Benefits of this type of sealing
The sealing can offer a number of benefits. From improved colour to better safety, here are a few of the major benefits:
An epoxy concrete sealer can prevent the current colour from fading over time. What’s more, it can also add a shiny finish to turn a dull surface into a vibrant space. After all, bare concrete is not the most attractive finish.
In addition to improving the overall colour, it can also help to reduce and prevent cracking. Not only can cracks be unsightly, but they also make it more challenging to keep the surface clean.
Stain and water resistance
Applying a sealer can help to prevent permanent stains. Chemical and oil spills are no longer an issue as they can be cleaned with a simple wipe.
Moving vehicles or foot traffic can cause a lot of dust if the floor is unsealed. Not only is this bad for the health of employees (especially allergy sufferers) but also for the lifespan of equipment.
Bare concrete can become slippery. It’s also easier to add safety signage, such as arrows, to surface which has been sealed correctly.
Lower energy bills
Surfaces that have been treated with an epoxy concrete sealer can reflect more light. In fact, some coatings can boost the light reflectivity by as much as 300%. This can brighten up a space which can help to lower energy bills.
Applying the sealer will improve the lifespan of the surfaces. By applying a sealant to the surface, you can extend its lifespan by 10 years. In the long run, these sealers can work out to be more cost-effective than having to reconstruct the surface.
How can unsealed surface get damaged?
The majority of businesses and homes have a lot of concrete surfaces. While this material is more durable than other types of surfaces like asphalt, it calls for proper maintenance and sealing as there are a number of factors that can cause damage to unsealed surface.
If you have an unsealed surface outside, fluctuation in temperature will make it more brittle over time. For example, regular exposure to direct sunlight can cause the layers to split. When this happens, small bubbles (known as blisters) can appear on the surface.
Since this material is porous, it can be penetrated by moisture. When this happens, the floor can chip or crack. It can also cause issues with hygiene as it can lead to a build-up of bacteria.
Considerations before deciding on epoxy concrete sealer
Businesses in Perth that need to seal a surface must consider the other substances that might already be present within the existing surface. Adding a new chemical to the surface can cause a negative reaction. When this happens, it can lead to bubbles, delamination, or discolouration.
The reason for this is that the sealer causes a permanent bond with the surface. Instead of simply resting on the surface, it sinks deeply into the pores so that it can offer adequate protection against elements like oil and water.
For this reason, it’s always recommended that you coat and protect your floor or countertops as soon as possible. This way, the chances that other substances can make their way into the surface are reduced.
Just like with any other floor, the following factors should also be considered:
- Area: Be sure to measure your space properly in terms of square metres or have a professional service measure it for you.
- Existing floor: Confirm the condition of the current floor, whether the floor will be brand new, or if demo work is needed.
- Design: Decide whether the new floor’s colour should match company branding or include a designer finish.
- Ratings: Be clear if you need slip resistance, HACCP accreditation, or food-grade solutions.
- Resistance: Decide if you need your floors to resist chemicals, water, or other materials.
- Traffic: Detail whether you expect only foot traffic or if your flooring will also need to accommodate vehicles.
Why choose Hawk CFC
Hawk CFC is the only West Australian installation company that boasts its own local manufacturing plant. This means that we can create custom solutions to help meet the special needs of our clients in Perth and Western Australia.
If you have an unsealed floor or countertop, you can turn to our team of flooring experts. We also offer a delamination warranty. So you can rest assured knowing that your newly sealed surface won’t show signs of bubbling or separation.
Identifying the most suitable sealer for your floor can be challenging. If you need a free consultation, give us a call on 0490 777 761 or complete the enquiry form on our website.
Frequently Asked Questions About Epoxy Concrete Sealer in Perth
How long does the sealer last?
These sealers usually last 5-10 years before they need to be recoated. That being said, there are a number of factors that can impact the lifespan of a sealer. These include:
- Product quality
- Number of coats
- Condition of the surface
- How it was applied
How many coats of the sealer are needed?
Most sealers should be applied in two coats. The first coat will typically be absorbed by the concrete which means that it will offer limited surface protection. The second coat will bond to the first coat to offer improved surface protection.